Surveyor - Bridgwater

The Surveyor  will provide dimensional control on site for MEH activities.  

• Ensure all surveying activities are undertaken safely and responsibly, and in accordance with the CDM Regulations
• Ensure all surveying activities are executed in line with relevant specifications
• Provide input for progress reporting on surveying activities within the Erection Area
• Review any supplied setting out data to check design co-ordinates against the site grid system to ensure compatibility
• Densify Survey Control where needed.
• Complete setting out surveys prior to equipment arriving on site for layout of the temporary equipment and the permanent equipment. Then continue to support the installation teams to final locate equipment then conduct post install location surveys for as built drawings all to the ensure compliance to the designed tolerances
• Setting out of mechanical, electrical and HVAC elements.
• Provide accurate centreline and level datum’s to enable accurate installation of mechanical equipment, pipe supports and piping systems
• Conduct surveys on pipe spools to provide as fabricated data including bolt hole rotations and flange deflections.
• Conduct surveys on installed elements to provide visual data to the installation team for them to better understand site conditions.
• Undertaking periodic instrument calibration checks
• To report any issues, concerns, or observations to the MEH Alliance Surveying Lead
• Undertaking periodic instrument calibration checks
• To attend any relevant site meetings with project stakeholders  
• Ensure all surveying activities are undertaken safely and responsibly, and in accordance with the CDM Regulations
• Ensure all surveying activities are executed in line with relevant specifications
• Provide input for progress reporting on surveying activities within the Erection Area
• Review any supplied setting out data to check design co-ordinates against the site grid system to ensure compatibility
• Densify Survey Control where needed.
• Complete setting out surveys prior to equipment arriving on site for layout of the temporary equipment and the permanent equipment. Then continue to support the installation teams to final locate equipment then conduct post install location surveys for as built drawings all to the ensure compliance to the designed tolerances
• Setting out of mechanical, electrical and HVAC elements.
• Provide accurate centreline and level datum’s to enable accurate installation of mechanical equipment, pipe supports and piping systems
• Conduct surveys on pipe spools to provide as fabricated data including bolt hole rotations and flange deflections.
• Conduct surveys on installed elements to provide visual data to the installation team for them to better understand site conditions.
• Undertaking periodic instrument calibration checks
• To report any issues, concerns, or observations to the MEH Alliance Surveying Lead
• Undertaking periodic instrument calibration checks
• To attend any relevant site meetings with project stakeholders

• Minimum of a level 5 qualification (HND) or above in a surveying field or closely related discipline.
• Minimum of 2 years’ experience working on a mechanical installation project. This requirement is mandatory
• Strong Setting out experience.
• Experience in the use of survey equipment (Total Station, digital level) and the production of survey reports.
• Conversant with all related legislation, codes, and standards.
• Knowledge of CDM regulations
• Experience in MS Office - Excel, Word

• 2 years’ experience as an onsite surveyor
• Experienced in working in a Joint Venture or Alliance environment
• Starnet experience desirable.
• Offshore experience desirable.